746
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_pos600.fm
+600 through +699 Error Message Descriptions
+600 through +699 Error Message Descriptions
Description
These errors are generated when a problem occurs that is specific to one of the test set’s instruments. These
errors are part of the test set’s core. Note that these measurements may not be present in every test
application and therefore, these errors may not be present in every test application. There is no plan at
present to support test application specific instruments.
An instrument in this context refers to the measurement-like functionality such as the audio generator and
not to the test set as a whole.
When one of these errors is generated, the ‘+600 errors’ bit in the questionable error status register is set.
Error Message Description
+601 Instrument failure; Audio generator hardware is not
responding
Indicates a problem occurs when attempting to
control the test set’s audio generator.
To Next Page
Loading...
