774
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_conf_gpib.fm
Configuring the Test Set’s GPIB
Configuring the Test Set’s GPIB
Description
The GPIB address is an integer between 0 and 30. The test set comes with a default address of 14 and may be
set/queried using the SYSTem subsystem or manually through the system configuration screen by selecting
the parameter and changing the number with the knob or the keypad.
The GPIB address is a non-volatile parameter. The GPIB address is not affected by any reset operation and
can only be changed by direct access to the parameter itself.
Related Topics
“SYSTem:COMMunicate” on page 636
To Next Page
Loading...
Need help?
General
