Chapter 6 257
Data Analysis
Analyzing Data on the Trace Using the Marker
6. Data Analysis
Reading only the actual measurement point/Reading the value
interpolated between measurement points
The point on the trace on which a marker can be placed differs depending on how the
discrete marker mode is set up.
Turning on discrete
mode
(Discrete ON)
A marker moves only between actual measurement points. When a
specific marker stimulus value is specified as a numerical value, the
marker is placed at the measurement point closest to the specified
value. A marker that is placed between interpolated points with the
discrete mode off automatically moves to the nearest measurement
point when the discrete mode is turned on.
Turning off discrete
mode
(Discrete OFF)
The marker can move from one actual measurement point to
another. Because it is interpolated, it can also move in the space
between measurement points.
Figure 6-2 Marker discrete mode
Turning Discrete Mode On or Off
Step 1. Press (or ) and (or ) to activate the trace on
which the discrete mode is set up.
Step 2. Press .
Step 3. Press Discrete to turn the discrete mode on or off.
To Next Page
Loading...
