Appendix D 695
Softkey Functions
Marker Menu
D. Softkey Functions
Marker Menu
Key Operation Function SCPI Command
Activates marker 1 and displays an input dialog box for setting the stimulus value for marker 1. Also displays
softkeys for setting and moving each marker.
Marker 1 Enables marker 1 if it is disabled. Also activates marker 1 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK1
:CALC{1-16}:MARK1:ACT
:CALC{1-16}:MARK1:X
Marker 2 Enables marker 2 if it is disabled. Also activates marker 2 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK2
:CALC{1-16}:MARK2:ACT
:CALC{1-16}:MARK2:X
Marker 3 Enables marker 3 if it is disabled. Also activates marker 3 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK3
:CALC{1-16}:MARK3:ACT
:CALC{1-16}:MARK3:X
Marker 4 Enables marker 4 if it is disabled. Also activates marker 4 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK4
:CALC{1-16}:MARK4:ACT
:CALC{1-16}:MARK4:X
More Markers Displays softkeys for setting markers 5 to 9.
Marker 5 Enables marker 5 if it is disabled. Also activates marker 5 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK5
:CALC{1-16}:MARK5:ACT
:CALC{1-16}:MARK5:X
Marker 6 Enables marker 6 if it is disabled. Also activates marker 6 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK6
:CALC{1-16}:MARK6:ACT
:CALC{1-16}:MARK6:X
Marker 7 Enables marker 7 if it is disabled. Also activates marker 7 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK7
:CALC{1-16}:MARK7:ACT
:CALC{1-16}:MARK7:X
Marker 8 Enables marker 8 if it is disabled. Also activates marker 8 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK8
:CALC{1-16}:MARK8:ACT
:CALC{1-16}:MARK8:X
Marker 9 Enables marker 9 if it is disabled. Also activates marker 9 and displays an
input dialog box for setting the stimulus value.
:CALC{1-16}:MARK9
:CALC{1-16}:MARK9:ACT
:CALC{1-16}:MARK9:X
Return Returns to the softkey display screen one level higher.
Ref Marker Enables the reference marker if it is disabled (the reference marker mode
[
Ref Marker Mode] is enabled at the same time). Also activates the reference
marker and displays an input dialog box for setting the stimulus value.
:CALC{1-16}:MARK10
:CALC{1-16}:MARK10:ACT
:CALC{1-16}:MARK10:X
Clear Marker Menu Displays softkeys for turning off each marker.
All OFF Turns off all markers on the active trace. None
Marker 1 Turns off marker 1 on the active trace.
:CALC{1-16}:MARK1
Marker 2 Turns off marker 2 on the active trace.
:CALC{1-16}:MARK2
Marker 3 Turns off marker 3 on the active trace.
:CALC{1-16}:MARK3
Marker 4 Turns off marker 4 on the active trace.
:CALC{1-16}:MARK4
Marker 5 Turns off marker 5 on the active trace.
:CALC{1-16}:MARK5
Marker 6 Turns off marker 6 on the active trace.
:CALC{1-16}:MARK6
Marker 7 Turns off marker 7 on the active trace.
:CALC{1-16}:MARK7
Marker 8 Turns off marker 8 on the active trace.
:CALC{1-16}:MARK8
Marker 9 Turns off marker 9 on the active trace.
:CALC{1-16}:MARK9
Ref Marker Turns off the reference marker on the active trace.
:CALC{1-16}:MARK10
Return Returns to the softkey display screen one level higher.
Marker Æ Ref Marker Replaces the stimulus value of the reference marker with that of the active
marker. As a result, the reference marker will be placed at the same position
as the active marker.
None
To Next Page
Loading...
