Chapter 6 265
Data Analysis
Searching for Positions that Match Specified Criteria
6. Data Analysis
Searching for the maximum and minimum measured values
You can search for the maximum or minimum measured value on the trace and move a
marker to that point (
Figure 6-8).
Figure 6-8 Searching for maximum and minimum measured values
Search for maximum
(Max)
Move active marker to point on trace where measured value is
greatest
Search for minimum
(Min)
Move active marker to point on trace where measured value is
lowest
Searching for Maximum and Minimum Values
Step 1. Following Step 1 to Step 4 in “Reading values on the trace” on page 253, activate the
marker you are using to search for the maximum and minimum values.
Step 2. Press .
Step 3. Press the corresponding softkey to move the marker to the maximum or minimum
measured value.
Softkey Function
Max Performs a search for the maximum value
Min Performs a search for the minimum value
NOTE When the data format is in Smith chart or polar format, execute the search only for the
main response value.
To Next Page
Loading...
