Agilent Technologies ENA Series

Chapter 16 543
Specifications and Supplemental Information
Test Port Input
16. Specifications and
Supplemental Information
Test Port Input
Table 16-10 Test Port Input Levels
Description Specification Supplemental Information
Maximum Test Port Input Level
300 kHz to 3 GHz
3 GHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
+10 dBm
+9 dBm
+7 dBm
+5 dBm
Damage Level
300 kHz to 8.5 GHz
RF +20 dBm
*1. The damage level for the case, that more than two signal spectra are applied like mixer measurement is summed
amplitude of 6.3 Vp-p is the damage level.
*1
,
±10 VDC (Source attenuator = 0
dB),
±25 VDC (Source attenuator = 5
dB or more), typical
Crosstalk
*2. Response calibration not omitted.
*2
3 MHz to 3 GHz
3 GHz to 6 GHz
6 GHz to 7.5 GHz
7.5 GHz to 8.5 GHz
−120 dB
−109 dB
−99 dB
−89 dB