534 Chapter 16
Specifications and Supplemental Information
Definitions
Definitions
All specifications apply over a 5°C to 40°C range (unless otherwise stated) and 90 minutes
after the instrument has been turned on.
Specification (spec.): Warranted performance. Specifications include guardbands to
account for the expected statistical performance distribution,
measurement uncertainties, and changes in performance due
to environmental conditions.
Supplemental information is intended to provide information that is helpful for using the
instrument but that is not guaranteed by the product warranty. This information is denoted
as either typical or nominal.
Typical (typ.): Expected performance of an average unit that does not include
guardbands. It is not guaranteed by the product warranty.
Nominal (nom.): A general, descriptive term that does not imply a level of
performance. It is not guaranteed by the product warranty.
To Next Page
Loading...
