NanoSuite 4
Agilent Nano Indenter G200 User’s Guide 4-50
Note that clicking to center a part of the sample works only when the
objective magnification in the
Objective submenu matches the actual
magnification of the installed objective. To select the correct objective
magnification, select Objective from the Nano Video HandSet
right-click menu.
To visually scan around the surface, click and drag on the video image
in the direction that you want the image to shift.
Nano Video HandSet Right-Click Menu
Right-clicking anywhere on the handset area while you are in the Nano
Video HandSet mode invokes the menu shown in
Figure 4-53.
Figure 4-53Nano Video Handset right-click menu
Remove Backlash
This command is not used in the G200 system.
After performing the tests, if the indentations are not located directly
under the microscope, a
Microscope to Indenter Calibration should be
performed. See the Tools Menu for more details.
To Next Page
Loading...
