Commonly Used Procedures 6
Agilent Nano Indenter G200 User’s Guide 6-18
22 Once a satisfactory area is located, click Define Array of Tests
Beginning at this Location, as shown in
Figure 6-27.
Figure 6-27Define Array of Tests Beginning at this Location button
This will open a dialog box like the one shown in Figure 6-28 on
page 6-18.
Figure 6-28Define a test array dialog box
23 Either:
a Select a predefined group from the Group drop-down box, or
b Specify the array in the X-Direction and Y-Direction:
To Next Page
Loading...
