Alcatel-Lucent OmniTouch - Page 114

............................................................................................................................................................................................................................................................
Sample DAS rulesSystem Configuration
2-94
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
s/^011011/011/ If the resulting string starts with 011011,
then the initial 011 is stripped.
s/^1666845(\d*)/\1@voipgw.company.com If the resulting string starts with the
string “1666845” followed by any digits
(for example, an extension), then the
result is an address comprising those
digits@voipgw.company.com (for
routing VoIP calls).
s/^\+x(.*)/\1@10.64.14.152:5070/ This causes an extension that is dialed
through the UI (indicated by x in the
DAS rule), to be routed to a gateway for
processing. In this case, there is a need to
have OmniTouch ACS send an INVITE
to port 5070, instead of the default port
5060.
s/^\+x?(\d{3,8})$/\1/ This allows for extension to extension
dialing through the DTMF interface in a
SIP configuration. The +x? allows for
either having the 1x or not, while the
number of digits retained is from 3 to 8.
(The default outbound SIP proxy is set
to the Alcatel-Lucent OmniPCX
Enterprise Office – OXE – IP address
and port.)