Alcatel-Lucent OmniTouch - Check Primary Server Configuration

To replicate the database from the Secondary to
Primary server
Management Actions
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
3-13
............................................................................................................................................................................................................................................................
Figure 3-8 Check Primary Server Configuration
........................................................................................................................................................................................................................
8 Wait for the server to reboot and log into the Web Administration page again.
........................................................................................................................................................................................................................
9 Re-enable replication on the Secondary server.
a. Click the Configuration tab.
b. Click the
Database Replication item.
c. Check the Enable Replication box.
d. Click the Save button.
........................................................................................................................................................................................................................
10 Replicate the database from the Secondary to the Primary. Make certain, you are on the
Secondary server.
a. Click Configuration.
b. Click the Database Replication item.
c. Click the
Replicate button.