Alcatel-Lucent OmniTouch - Upload License on Primary

............................................................................................................................................................................................................................................................
To restore configuration settings on the new Primary
server
Management Actions
3-10
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
Figure 3-7 Upload License on Primary
........................................................................................................................................................................................................................
4 Restore the Primary server’s configuration.
a. Click the Configuration tab.
b. Click the Manual Server Restore item.
c. Click the Browse button to locate the *.md5 file from the latest backup of the
Primary.
d. Click the
Restore button.
e. Click the OK button in the resulting message dialog box.
f. In the Files that need to be uploaded box, click the Browse button to select the
*a* files from the latest backup of the Primary.
Note: There may be multiple files with the following sequential extensions: *.aa,
*.ab, *.ac, etc. The filenames will appear on the Administration page. You must locate
(using the Browse button) and upload each individual file.
g. After all files are uploaded, the server automatically restores, and after restoration,
the system will reboot.
........................................................................................................................................................................................................................
5 Log into the Serial Administration console again, on the new Primary server:
Username: admin