............................................................................................................................................................................................................................................................
To upgrade server softwareManagement Actions
3-26
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
3 Click the shutdown method (Restart or Power Off).
Note: The shutdown will start immediately, terminating any calls or activities in
progress.
Figure 3-17 Shut Down System
Note: Clicking on the Restart button will perform a full reboot of the Alcatel-
Lucent Advanced Communications Server. The server loses contact with your browser
session during the reboot – therefore, you must invoke and log into OmniTouch ACS’s
Administration application after the restart has completed in order to check its status.
........................................................................................................................................................
E ND OF STEPS
To upgrade server software
OmniTouch ACS supports online upgrades of the server software. Upgrades are typically
done only to install new releases of OmniTouch ACS software.
Upgrades can be done remotely, or locally by using an upgrade CD or DVD. To perform an
upgrade, you will need to know the location of the upgrade file. Your customer support
representative can help you identify the correct file to use and its location.
Note: Starting with Release 7.0, OmniTouch ACS will only be offered on the Red
Hat Enterprise 4.0 (RHE4) platform. OmniTouch ACS systems that contain TDM
Network Interface TP240 Modules cannot be upgraded to OmniTouch ACS 7.0 or 7.1
or 7.1.x because there is no driver support for the TP240 card in RHE4. If you want to
upgrade to ACS 7.0 or 7.1 or 7.1.x, replace the TP240 card with a TP260 which is
available from Alcatel-Lucent, or switch to the IP trunking interface (for example,
SIP).
To Next Page
Loading...
