Alcatel-Lucent OmniTouch - Page 163

To shutdown the serverManagement Actions
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
3-25
............................................................................................................................................................................................................................................................
a. Click the Configuration tab.
b. Click the Licensing item.
c. Locate the license file by using the Browse button.
d. Click the Upload button.
e. You must locate and upload your own VMware license if you are licensed for
Application Sharing.
........................................................................................................................................................................................................................
8 Verify/change any TCP/IP settings.
a. Click the Configuration tab.
b. Click the TCP/IP Settings item.
c. After data is verified or changed, click the Save button.
Note: Yo u m u s t c l i c k SAVE, even if no data was changed because this page must be
saved for complete restoration to take place.
........................................................................................................................................................................................................................
9 Configure E-mail appropriately.
a. Click Configuration.
b. Click the System Options item.
c. Configure E-mail settings.
d. Click the Save button.
Note: Yo u m u s t c l i c k SAVE, even if no data was changed because this page must be
saved for complete restoration to take place.
........................................................................................................................................................
E ND OF STEPS
Reboot the server.
To shutdown the server
This function allows the Administrator to gracefully shut down ACS.
........................................................................................................................................................................................................................
1 Click the Configuration tab.
........................................................................................................................................................................................................................
2 Click the Shutdown item.