Alcatel-Lucent OmniTouch - TCP;IP Settings; To Configure the Tcp;Ip Information for Omnitouch Acs

To configure the TCP/IP information for OmniTouch ACSSystem Configuration
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
2-7
............................................................................................................................................................................................................................................................
To configure the TCP/IP information for OmniTouch ACS
........................................................................................................................................................................................................................
1 Click the Configuration tab.
........................................................................................................................................................................................................................
2 Click the TCP/IP Settings item.
........................................................................................................................................................................................................................
3 Verify or provide the correct settings on the TCP/IP Settings page.
Note: All of the following values should be the same as those set during installation
– refer to the Alcatel-Lucent OmniTouch My Teamwork Unified Conferencing and
Collaboration Application Installation Guide.
Table 2-1 TCP/IP Settings
IP Address The address assigned during installation. IP
address settings may be changed at any time by
entering the new TCP/IP settings and clicking
the Save button.
Netmask Mask used to divide the IP address into
subnets.
Default Gateway The Gateway assigned during installation.
Web Server Name This is the URL users will enter to access the
server from their browsers. (It is typically the
hostname.domain name.)
Hostname This is the valid hostname (for example,
yourserver1) that was assigned during
installation.
Domain Name This is the valid domain name with extension
(for example, yourcompany.com) that was
assigned during installation.
Primary/Secondary NTP Server A Network Time Protocol (NTP) server is
required for successful operation of your
Alcatel-Lucent OmniTouch Advanced
Communications server.
Primary/Secondary Name Server The Name server (DNS) assigned during
installation.