Alcatel-Lucent OmniTouch - To Restore Configuration Settings on the New Primary Server

To restore configuration settings on the new Primary
server
Management Actions
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
3-9
............................................................................................................................................................................................................................................................
To restore configuration settings on the new Primary server
........................................................................................................................................................................................................................
1 Log into the Serial Administration console on the New Primary server:
Username: admin
Password: changeme
........................................................................................................................................................................................................................
2 Configure any required networking information.
a. Select Networking Configuration.
b. Use DHCP appears. Select Yes or No and press Enter.
c. Configure your Network appropriately.
d. Reboot the server.
........................................................................................................................................................................................................................
3 Log into the Web Administration page on the Primary server and upload the license
obtained when the system was purchased.
a. Click the Configuration tab.
b. Click the Licensing item.
c. Locate the license file by using the Browse button.
d. Click the Upload button.