Alcatel-Lucent OmniTouch - Access Code Generation; Access Codes; To Set the Range of Access Codes

............................................................................................................................................................................................................................................................
Access codesSystem Configuration
2-62
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
Access codes
The Alcatel-Lucent OmniTouch Advanced Communication Server (ACS) provides two
ways to increase the number of available access codes without generating longer codes
using the following screen.
Figure 2-33 Access Code Generation
To set the range of access codes
........................................................................................................................................................................................................................
1 Click the Configuration tab.
........................................................................................................................................................................................................................
2 Click the Access Codes item.
........................................................................................................................................................................................................................
3 Increase the number of Access Codes:
Change the Access Code format to include either two digits or one digit of Node ID (a
requirement for routing in stacked environments). The one digit Node ID increases
the Access Code count to 1,000,000 per server.