............................................................................................................................................................................................................................................................
IP audio/video preferencesProvisioning and Account Management
4-38
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
IP audio/video preferences
There are three ways to connect to another user:
Table 4-8 Connecting to Another User
Video Endpoint This is how to reach a user’s video client. Just a user can be contacted
through a phone number, a video user has a video endpoint for video
conferencing.
SIP SIP:SIP Address (for example, SIP:pat@alcatel-
lucent.com)
H323 There are two ways to connect using H323:
H323:IP address
(for example, H323:129.168.10.1)
H323:Registered H323Name
(for example, H323:pat,where pat is registered with the
gatekeeper)
ISDN ISDN:Telephone Number
(for example, ISDN:16175555567)
Use video endpoint for audio in
video calls
Check this if your video endpoint device has a
microphone.
Use internal video client Check this if you want your video to appear in
the console window. ActiveX is required to run
the internal video client.
Important! The My Teamwork internal
video client will not run on Windows Vista™
using any browser.
Use Automatic Video Configuration Check this if your network does not require a
Registrar/Proxy server for video conferencing.
Do not select Automatic Video
Configuration if your system administrator
has provided you with network configuration
information for your video settings. In this case,
use manual configuration.
Note: Your system may require that
Automatic Video Configuration only be
used on the network where the My Teamwork
server is installed.
To Next Page
Loading...
