Alcatel-Lucent OmniTouch - A Error Codes and Alarm Conditions

A-1
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
A Error Codes and Alarm
Conditions
Overview
Purpose
This appendix differentiates between alarms and alerts through conditions and examples.
Contents
Server Alarm Conditions and Messages
No trunks available (trunkalert)
Subject= “ACS alarm” Message= “no phone trunks are operational.”
Description: T1/ISDN PRI circuit is out of service.
Server Alert Conditions and Messages
bbmux restart (alert)
Subject= “ACS alert” Message=”Blackberry server restart at HH:MM:SS MM/DD/YYYY
Description: A restart of the Blackberry Server at time specified.
ivr restart (alert)
Subject= “ACS alert” Message= “Incoming call server restart at HH:MM:SS
MM/DD/YYYY”
Description: A restart of the Incoming call server at the specified time. Dial-in
conferences are affected by this restart.
mcu restart (alert)
Server Alarm Conditions and Messages A-1
Server Alert Conditions and Messages A-1