Alcatel-Lucent OmniTouch - Adding a Prompt Set; To Update or Change the Voice Prompts

............................................................................................................................................................................................................................................................
To update or change the voice promptsSystem Configuration
2-36
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
Each prompt is saved in an 8 kHz, 8 bit, monophonic .wav format. The complete list of
prompts is provided in see Appendix C, Voice Prompts.
........................................................................................................................................................
E ND OF STEPS
To update or change the voice prompts
........................................................................................................................................................................................................................
1 Create the individual prompt voice files in 8 kHz, 8 bit .wav format.
OmniTouch ACS does not support direct recording of prompts to the server. However,
many commercial audio recording applications and professional recording services can be
used for creating the individual prompt files.
Note: The prompt files should be named 00.wav through 279.wav. To reference the
wording of the default prompts, see Appendix C, Voice Prompts.
........................................................................................................................................................................................................................
2 When uploading a partial prompt set, save updated prompts only and the version.txt files
in a compressed .zip format file on your PC. If you are uploading all new prompts, a full
prompt set and the version.txt file in a compressed .zip format file is needed.
........................................................................................................................................................................................................................
3 Once the new prompt set file is created, upload that prompt set .zip file to the server, by
following these steps:
1. Click the Browse button and select your new prompt set file (or type in the full path
name to the Prompt set file).
2. Enter a Prompt set name (which will make it easier to manage multiple prompt sets in
the future). The name must be alphanumeric. It is not case sensitive.
3. Click
Add new set.
Figure 2-17 Adding a Prompt Set