............................................................................................................................................................................................................................................................
Manual server restoreManagement Actions
3-4
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
6 Click Save.
After clicking Save, you will be presented with a browser dialog box asking where on your
local machine or network you want to save the resulting md5 file.
........................................................................................................................................................
E ND OF STEPS
Manual server restore
A system backup can only be restored to a system running the exact software revision that
was in use when the backup was created.
Note: The restoration process is destructive. This means all existing user data and
configuration settings will be deleted and replaced with the contents of the backup file.
Use non-secure FTP Use non-secure FTP (File Transfer Program) to
copy files between the ACS server and the
Destination Host. Authentication is not
required.
Backup Chunk Size in MB
(up to 1024 MB)
This is used to break up a large file into smaller
file chunks for file transfer.
Verify Settings To verify your settings are correct, click this
button. A panel listing the verification progress
and results appears. If you receive no error
messages, click Save.
To Next Page
Loading...
