Alcatel-Lucent OmniTouch - Page 129

To construct document conversion VMSystem Configuration
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
2-109
............................................................................................................................................................................................................................................................
a. Shut down the Windows virtual machine by selecting
Start–>Turn Off Computer and click Turn Off.
Important! Do NOT use the VMware Power Off button.
b. After the virtual machine is off, double-click the Hard Disk line (under Devices).
c. Click the Advanced... button in the lower right corner.
d. Leave the Mode as Independent and select the Nonpersistent radio button so
changes made are discarded on Power Off.
e. Click OK on the Advanced Hard Disk Options page.
f. Click OK for the Virtual Machine Settings page.
g. Close the TightVNC window.
........................................................................................................................................................................................................................
9 Mark the installation as completed.
a. Return to the Web Administration window on the client workstation. Select
Configuration–>Advanced Settings–>Construct Document Conversion VM.
b. Locate the box labeled Step 4: Complete or Cancel Document Conversion VM
Construction
at the bottom of the page. Click the Complete button and click the
OK button in the resulting dialog box.
Note: If you forget step 9.b, parts of the Document Conversion system will not start
when OmniTouch ACS is powered on.
c. Select Configuration–>Shutdown and click the Restart button to restart the
server.
........................................................................................................................................................................................................................
10 Test the new document sharing virtual machine.
When the server has rebooted, two tests should be performed.
a. Log into the Web Administration and select
Monitoring–>Server Status. Make
certain both the VMware Status and the Watchdog Status are 0/green.
Note: It may take up to 5 minutes for the virtual machine to initialize to a ready
state. All servers and watchdogs should eventually become green.
b. Using Internet Explorer on any client workstation, log into OmniTouch ACS as a
user. Select Make a Presentation and share one of each of the supported type of
documents (Word, Excel, and Powerpoint).
........................................................................................................................................................
E ND OF STEPS