Alcatel-Lucent OmniTouch - Page 156

............................................................................................................................................................................................................................................................
To restore configuration settings on the new Secondary
server
Management Actions
3-18
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
e. Reboot the server.
........................................................................................................................................................................................................................
7 Log into the Web Administration page on the Secondary server and upload any licenses
obtained when the system was purchased.
a. Click the Configuration tab.
b. Click the Licensing item.
c. Locate the license file by using the Browse button.
d. Click the Upload button.
e. Upload the VMware license you obtained, if this option was chosen.
........................................................................................................................................................................................................................
8 Verify/change any TCP/IP settings.
a. Click the Configuration tab.
b. Click the TCP/IP Settings item.
c. After data is verified or changed, click the Save button.
Note: You must click SAVE, even if no data was changed because this page must be
saved for complete restoration to take place.
........................................................................................................................................................................................................................
9 Configure E-mail appropriately.
a. Click Configuration.
b. Click the System Options item.
c. Configure E-mail settings.
d. Click the Save button.
Note: You must click SAVE, even if no data was changed because this page must be
saved for complete restoration to take place.
........................................................................................................................................................
E ND OF STEPS