............................................................................................................................................................................................................................................................
To generate a call report for a particular userProvisioning and Account Management
4-46
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
Leg Attributes One or more of the following values separated
by a “-” (for example, adhoc-leader).
• adhoc: Not an access-coded call
• leader: Leg joined using a Leader access
code (may also be the originator in an adhoc
call)
• participant: Leg joined using a Participant
access code (may also be a user who is a
called party in an adhoc call)
• record: Leg used to record the call
• playback: Leg used to play back a
recording within a call
Message Count Total number of Instant Messages sent during a
session.
Organization Name of Organization call owner belongs to.
Domain Name of Domain where call owner's
Organization resides.
Billing Extension PBX extension charged for the call. (Only used
when placing calls through an Alcatel-Lucent
OXE SIP gateway.)
Audio Payload The audio codec used for each leg. If the codec
changes during a call, the final codec used for
the leg will be recorded. If ACS does not know
which codec was negotiated between end-
points, the requested or default audio codec will
be recorded.
Video Parameters The complete set of video parameters specified
by the call owner when scheduling the
conference. The set of values will vary
depending on the type of Video MCU
configured for the system.
The actual values used during a session may be
different. For example, if the user requests
H.264, but H.261 is negotiated, H.264 will be
recorded.
To Next Page
Loading...
