Alcatel-Lucent OmniTouch - Page 229

Supported bulk provision parametersProvisioning and Account Management
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
4-61
............................................................................................................................................................................................................................................................
email_type Sets the default E-mail invitation format. The following
values are valid:
appshare_in_front Determines whether a conversation window is allowed to
appear over an application sharing session window.
two_party_call_window Determines whether two participants in a call automatically
have a two-party call window pop up when a call is started.
Phone List Management
Each one of the following parameters is managed through the Update action in Bulk
Provisioning:
update,name@domain.com,parameters
phone_action [1...n] The following actions can be performed using this
parameter:
• Add
• Modify
• Delete
Example: Bulk Provisioning of Phones
Note: phone_label and primary_phone are optional
parameters.
phone_id represents the phone number to which you are
applying an action. It is usualy the extension. It is followed
by an asterisk (*) and the phone label associated with it.
Important! Only one PBX phone number can be stored
in the database. When a new PBX number is added, it
overwrites/replaces any existing PBX number.
To add a new phone:
update,name@domain.com,phone_action1=add;
phone_no1=1111;phone_label1=HOME;
phone_source1=PBX;primary_phone=phone_no1
To modify a phone (using above example):
update,name@domain.com,phone_action1=modify;
phone_no1=2222;phone_label1=GSM;
phone_source1=PBX;phone_id1=x1111*HOME
To delete a phone (using above example):
update,name@domain.com,phone_action1=delete;
phone_id1=x2222*GSM
Parameter Description
LONG Generic Long
SHORT Generic Short
POPUP Popup Window