Alcatel-Lucent OmniTouch - Page 24

............................................................................................................................................................................................................................................................
OverviewSystem Configuration
2-4
8AL90208USAD ed01
November 20, 2008
............................................................................................................................................................................................................................................................
To see a list of remote servers 2-74
To modify the settings for an existing remote server 2-74
To delete which servers are federated 2-75
To configure each server in a stack 2-77
To configure a server to be a Primary 2-82
To configure a server to be a Secondary 2-83
To clear the Secondary server’s database in preparation for synchronization 2-84
To initiate synchronization between the Primary and Secondary servers’
databases
2-84
To define extension numbers 2-88
To configure the way phone numbers are displayed 2-90
To c o n f i g u r e D A S r u l e s 2 - 9 2
To configure the server to generate SNMP traps 2-95
To enable OmniTouch ACS alerts to be sent to the UC alarm and alert server 2-98
To change the IP range 2-99
To disable sendmail 2-100
To enable IM archiving 2-102
To construct document conversion VM 2-104
To configure the settings of the Automated Message Delivery System 2-113
To access ECS settings 2-114
To access the list of all ECS Services and Agents 2-116
To modify the ECS Host IP address 2-117