AT-GS900M Series CLI Reference
Section II: Switch Management 107
An example of the command output is shown in Figure 13.
Figure 13. SHOW LOG Command
Examples
The following command displays 10 log messages that have severity level
5 and greater in reverse date order:
Manager > show log severity=>5 reverse=10
The following command displays log messages on 7/7/2014 and after:
Manager > show log date=>2014-07-07
Date Time Lv Message
----------------------------------------------------------------------------
2011-03-25 14:09:28 7 Switch startup, Ver 2.3.2 B01 Mar 24 2011, 21:24:14
2011-03-25 14:09:28 6 Port 7: interface is up
2011-03-25 14:09:42 3 User login on serial port
2011-03-31 14:06:27 3 User logout on serial port
----------------------------------------------------------------------------