Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section II: Switch Management 143
Another example of the command output is shown in Figure 23.
Figure 23. SHOW SNMP TRAP Command with Parameter
Example
The following example displays a list of trap statuses:
Manager > show snmp trap
The following example displays the information about the trap type
coldstart:
Manager > show snmp trap=coldstart
Manager > show snmp trap=coldstart
SNMP Trap Information
-----------------------------------------------------
Cold Start TRAP .................. Enabled
Community ...................... public
Status ....................... Enabled
Trap Status .................. Enabled
Trap Host .................... 192.168.1.1
Trap Host .................... 192.168.1.5
Community ...................... private
Status ....................... Enabled
Trap Status .................. Enabled
Trap Host .................... 192.168.2.1
-----------------------------------------------------

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English