Allied Telesis AT-GS908M User Manual

Chapter 20: Rapid Spanning Tree Protocol (RSTP) Commands
370 Section III: Layer 2 Switching
Description
This command sets a port’s RSTP settings.
Examples
The following command sets the port cost to 1,000,000 and port priority to
224 (increment 14) on port 4:
set stp port=4 portcost=1000000 portpriority=14
The following command changes ports 6 to 8 so they are not considered
edge ports:
set stp port=6-8 edgeport=no

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English