Ashida ADR233B - Date and Time; Date and Time (if Disabled)

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 276 of 479
ADR233B
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
8.4.4.10 Date and Time
8.4.4.10.1 Date and Time (If Disabled)
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
Password protected window for “Global” setting. i.e. General
Settings, Setting Group, Port F, Port 1, PORT R , IRIG Port,
Disturbance, Display Contrast and Date and Time.
Press the Right arrow key () to move to the next option.
IRIG Port
Disturbance
Display Contrast
Date And Time

Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Date And Time.
Password protected window for “Date and Time” setting i.e.
Local Time Enable, DST Enable, RP Time Zone, SET Hours,
SET Minutes, SET Seconds, SET Date, SET Month and SET
Year.
Press the Right arrow key () to move to the next option.
Date And Time
Date/Time
Tm: 18:26:15
Dt : 16/04/18
Read-only setting
This window shows the set Date & Time
Press the Minus / Down arrow key (- /) to move to the next
option.
Date And Time
LocalTime Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Local Time Enable can be set i.e.
Disabled / Fixed / Flexible.
Press the Minus / Down arrow key (- /) to move to the next
option.