Ashida ADR233B - Save Settings; Setting Group (if Set as Enabled or Disabled); Settings Group

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 262 of 479
ADR233B
option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
8.4.4.3 Settings Group
8.4.4.3.1 Setting Group (If set as Enabled or Disabled)
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
Password protected window for “Global” setting. i.e. General
Settings, Setting Group, Port F, Port 1, PORT R , IRIG Port,
Angle Calibration, Disturbance, Display Contrast & Date and
Time.
Press the Right arrow key () to move to the next option.
General Settings
Settings Group

PORT F
PORT 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Settings Group.
Password protected window for “Settings Group” i.e.
Factory Defaults, Active Group, Copy From, Copy To, G1, G2,
G3 and G4.
Press the Right arrow key () to move to the next option.