Ref ID : ADR233B/IM/SGI
Rev No. : 05
ADR233B
• Are trained in the care and use of safety apparatus in accordance with safety engineering
practices.
• Are trained in emergency procedures (first aid).
The operating manual of the equipment gives instructions for its installation, commissioning and
operation. However, the manual cannot cover all conceivable circumstances or include detailed
information on all topics. In the event of doubts or specific problems, do not take any action
without proper authorization. Contact the appropriate person from Ashida Technical / After Sales
Service department and request the necessary information.
SYMBOLS AND EXTERNAL LABELS ON THE EQUIPMENT
For safety reasons the following symbols and external labels, which may be used on the
equipment or referred to in the equipment documentation, should be understood before the
equipment is installed or commissioned.
Caution: refer to equipment documentation
Caution: risk of electric shock
Protective Conductor (Earth*) terminal
Functional/Protective Conductor (*Earth)
terminal.
Note: This symbol may also be used for a
Protective Conductor (Earth) Terminal if that
terminal is part of a terminal block or sub-
assembly e.g. power supply.
*NOTE: THE TERM EARTH USED THROUGHOUT THIS GUIDE IS THE DIRECT
EQUIVALENT OF THE NORTH AMERICAN TERM GROUND.
INSTALLING, COMMISSIONING AND SERVICING
Personnel undertaking installation, commissioning or servicing work for this equipment is to
be made aware of the correct working procedures to ensure safety. The equipment
documentation should be consulted before installing, commissioning or servicing the
equipment. Terminals exposed during installation, commissioning and maintenance may
To Next Page
Loading...
