Ref ID : ADR233B/IM/SGI
Rev No. : 05
ADR233B
SAFETY AND GENERAL INFORMATION
This guide and relevant operating or service manual documents for the equipment provide full
information of safe handling, commissioning and testing of this equipment and also includes
description of equipment label markings.
The technical data in this safety guide is typical. Please read technical data section of the
relevant product publication(s) for data specific to particular equipment.
Before using the equipment, the user should be familiar with the contents of this Safety Guide
and the ratings on the equipment’s rating label.
Before the equipment is installed, commissioned or serviced, the external connection diagram
should be referred.
HEALTHY AND SAFETY
This information in the Safety Section of the equipment documentation is intended to ensure
that equipment is properly installed and handled in order to maintain it in a safe condition.
It is assumed that everyone who will be associated with the equipment will be familiar with the
contents of that Safety Section or this Safety Guide.
When electrical equipment is in operation, dangerous voltages will be present in certain parts of
the equipment. Failure to warning notices, incorrect use or improper handling may endanger
personnel / equipment, cause personal injury or physical damage.
Before working in the terminal strip area, the equipment must be isolated.
Proper and safe operation of the equipment depends on appropriate shipping and handling,
proper storage, installation and commissioning and on careful operation, maintenance and
servicing. For this reason only qualified personnel may work or operate the equipment.
Qualified personnel are individuals who
• Are familiar with the installation, commissioning, operation of the equipment and of the
system to which it is being connected.
• Are able to safely perform switching operation in accordance with accepted safety and to
isolate ground and label it.
To Next Page
Loading...
