Ashida ADR233B - General Setting

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 257 of 479
ADR233B
IRIG Port

Read-Only Setting
This window shows “IRIG Port” setting.
Press the Minus / Down arrow key (- /) to move to the next
option.
Disturbance

Editable Setting
Password protected window for “Disturbance” setting i.e.
Post Trigger and sampling.
Press the Minus / Down arrow key (- /) to move to the next
option.
Display Contrast

Editable Setting
Password protected window for “Display Contrast” setting
i.e. Contrast Set.
Press the Minus / Down arrow key (- /) to move to the next
option.
Date and Time

Editable Setting
Password protected window for “Date and Time” setting i.e.
Local Time Enable, Local Time Offset. DST Enable, RP Time
Zone, SET Hours, SET Minutes, SET Seconds, SET Date,
SET Month and SET Year.
Press the Left arrow key () to move to the Main Menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
8.4.4.2 General Setting
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
Password protected window for “Global” setting. i.e. General
Settings, Setting Group, Port F, Port 1, PORT R , IRIG Port,
Disturbance, Display Contrast and Date and Time.
Press the Right arrow key () to move to the next option.