Ashida ADR233B - Page 258

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 258 of 479
ADR233B
General Settings

Settings Group
PORT F
PORT 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select General Settings.
Password protected window for “General Settings” i.e.
Password, TID, SID, Phase, System Frequency, Opto I/P
Supply, W1 CB Operation, W2 CB Operation, PB-1
Operation, tPB-1 Pulse, PB-2 Operation, tPB-2 Pulse, Config
Port, Timesync Master, Description, Model Number, Serial
Number, Software Version, Hardware Version and
Equipment.
Press the Right arrow key () to move to the next option.
General Settings
Password
* * * *
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Password can be set i.e. 0000 to
zzzz/ZZZZ. (Refer Password settings)
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
TID
Transformer_ID
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Transformer ID can be set i.e. a to z, A
to Z, 0 to 9 and special characters i.e. (. / - )
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
SID
SubStn_ID
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Substation ID can be set i.e. a to z, A to
Z, 0 to 9 and special characters i.e. (. / - )
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
Phase Ref.
PT
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Phase Ref. can be set i.e. PT / W1-Rph /
W2-Rph.
Press the Minus / Down arrow key (- /) to move to the next