Ashida ADR233B - Date and Time (if Enabled)

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 278 of 479
ADR233B
Press the Minus / Down arrow key (- /) to move to the next
option.
Date And Time
SET Month
4
Range 1 – 12
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the SET Month can be set.
The setting range is from 1 to 12 in step of 1.
Press the Minus / Down arrow key (- /) to move to the next
option.
Date And Time
SET Year
18
Range 0 – 99
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the SET Year can be set.
The setting range is from 00 to 99 in step of 1.
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
8.4.4.10.2 Date and Time (If Enabled)
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
Password protected window for “Global” setting. i.e. General
Settings, Setting Group, Port F, Port 1, PORT R , IRIG Port,
Disturbance, Display Contrast and Date and Time.
Press the Right arrow key () to move to the next option.