Ashida ADR233B - Adding Bay to Substation

Doc ID : ADR233B/IM/01
Ref ID : ADR233B/IM/SI
Rev No. : 05
Page No. : 85 of 479
ADR233B
3.5 Bay
3.5.1 Adding Bay to Substation
To add a new Bay right click on substation. Following context menu will appear.
Figure 16: Add new Bay
Click on “New Bay” following window will appear.
Figure 17: Add new bay name
Type a bay name and click OK. A new bay will be added to RT System.