Ashida ADR233B - Output & Led Test

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 304 of 479
ADR233B
REPORTING
SYSTEM CONFIG
PROTECTIONS
CLEAR RECORDS

8.4.10 OUTPUT & LED TEST
8.4.10.1 Output & LED Test
SYSTEM CONFIG
PROTECTIONS
CLEAR RECORDS
OUTPUT & LED TEST

Password protected window for “Output & LED Test”
setting. i.e. Test Mode, Test Output, Test Apply and Test
LED.
Press the Right arrow key () to move to the next option.
Output & LED Test
Test Mode
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Mode can be set i.e. Disabled / Test
Mode / Contacts Blocked.
Press the Minus / Down arrow key (- /) to move to the next
option.
Output & LED Test
Test Output J
00000000
Range 0 – 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Output J can be set i.e. 0 / 1 ( 0 =
Not Operated / 1 = Operated)
Press the Minus / Down arrow key (- /) to move to the next
option.
Output & LED Test
Test Output K
00000000
Range 0 – 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Output K can be set i.e. 0 / 1 ( 0 =
Not Operated / 1 = Operated)
Press the Minus / Down arrow key (- /) to move to the next
option.