Ashida ADR233B - Page 305

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 305 of 479
ADR233B
Output & LED Test
Test Output L
00000000
Range 0 – 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Output L can be set i.e. 0 / 1 ( 0 =
Not Operated / 1 = Operated)
Press the Minus / Down arrow key (- /) to move to the next
option.
Output & LED Test
Test Output M
00000000
Range 0 – 1
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Output M can be set i.e. 0 / 1 ( 0 =
Not Operated / 1 = Operated)
Press the Minus / Down arrow key (- /) to move to the next
option.
Output & LED Test
Test Apply
No Operation
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test Apply can be set i.e. No Operation /
Apply Test / Remove Test.
Press the Minus / Down arrow key (- /) to move to the next
option.
Output & LED Test
Test LED
No Operation
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Test LED can be set i.e. No Operation /
Apply Test.
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.