Ashida ADR233B - Default Display; Menus

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 246 of 479
ADR233B
After receiving one time password, customer should follow the same procedure explain in
Section 8 User Guide clause: 8.3 in instruction manual
8.4 MENUS
8.4.1 Default Display
After Power ON or when the TARGET RESET + EDIT Feather Touch Keys are pressed simultaneously;
the relay will display the following message.
ADR233B
Tx. Diff Prot
This window will flash momentarily showing the following
Relay Type : ADR233B
Relay Name : TRANSFORMER DIFFERENTIAL
PROTECTION
Then the control will go automatically to following window
ID = 1
SW = V5.03
This is default window showing
Unit ID = 1
Software Version = V5.03
W1 – IA MAG :
0 A
W1 – IB MAG :
0 A
This window shows Winding 1 (W1) Primary Current in Phase
A & Phase B.
Press the Right arrow key () to move to the next option.
MEASURMENTS

GLOBAL
CB CONTOL
REPORTING
This is default window showing the Main Menus.