Ashida ADR233B - Page 245

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 245 of 479
ADR233B
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Step 11: Press the Left arrow key () to SAVE the changes.
SAVE Settings
This window will flash for a moment and the control will return
to the main menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
Note: The User can use the Target Reset to Discard the settings.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Step 12: Press the Target Reset key to Cancel the Changes
(i.e. to Discard the Settings)
DISCARD Settings
This window will flash for a moment and the control will return
to the main menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING
RECOVER OF PASSWORD:
In case if password is forgotten kindly contact manufacturer.
Company will provide one time password to enable to set new password.
For one time password the user needs to send serial number, Date & Month display on Relay HMI.