Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
ADR233B
Password = 0001
This window will be display and the extreme right alpha /
numerical number will start blinking.
Note: The selected alpha / numerical number can be shifted
right to left and left to right by using the left arrow key () and
Right Arrow key ().
Password = 0000
Step 6: Enter the perversely set Password by using the Plus /
Up arrow key (+ /) or the Minus / Down arrow key (- /).
Note: Default password is 0000.
Step 7: After editing the Password, press the EDIT Key.
Password = 0000
Wrong Password
This window is displayed; if in-corrected Password is entered
and the display will move to the next option.
Password = 0000
Password OK
This window is displayed; if corrected Password is entered the
display will move to the next option.
General Settings
Password
0000
This window will be display.
Step 8: Enter the New Password by using the Plus / Up arrow
key (+ /) or the Minus / Down arrow key (- /) option.
[All Editable settings are password protected so when the
EDIT key is pressed it will display the password and the
settable Alpha / Numerical value will start blinking].
The Password is four (4) digits alpha numeric. i.e. 0000 –
zzzz/ZZZZ
Step 9: After editing the Password, press the EDIT Key. The
settable Alpha / Numerical value will stop blinking.
Step 10: Press the Right arrow key () to move to the next
option
To Next Page
Loading...
