Ref ID : ADR233B/IM/SI
Rev No. : 05
Page No. : 74 of 479
ADR233B
3 RTV2 SOFTWARE INFORMATION
3.1 Overview
ASHIDA Relay Talk Version 2 (RTV2) software made available by ASHIDA to support ADR233B
Transformer protection relay. It is also useful to other ASHIDA protection relay.
Sr. No. Application Software Description
1 RTV2 Software
Customizes ADR233B Settings and configure
communication, input and output for specific
applications
This section describes how to get started with the ADR233B and RTV2 software. It particularly
explains about the software setup and working procedure.
3.1.1 RTV2 Software Features
Connections ADR233B is connected to the PC through Front port as well as
Rear port.
Settings Editor Provides online as well as offline utility to interface with ASHIDA
Relay series,
AProLogic Allows user to program the inputs, outputs and LEDs
61850 Configuration Allows user to configure the IEC61850 communication.
Events Provides event analysis tools.
History Faults Provides History fault analysis tool
Disturbance Record Provides oscillography analysis tools.
Time Synchronization Local clock time synchronized data is available.
Measurements Provides online power system parameter measurements
Status Provides status of the input, output and protection functions tool.
Control Provides the control function tool (output, input, LED)
Alias Allows user to label the outputs and inputs.
Note: The screen shot of RTV2 software is common for All ASHIDA Modular, Enhance and Basic
Series Relay.
To Next Page
Loading...
