Ashida ADR233B - Page 261

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 261 of 479
ADR233B
General Settings
Model Number
ADR233BE0xxxxxxxxxxS
Read-only
This window shows the Model Number of the relay.
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
Serial Number
xxx233Bxxxx
Read-only
This window shows the Serial Number of the relay.
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
Software Version
233BE0xxxxxxxVx.xx
Read-only
This window shows the Software Version of the relay.
Press the Minus / Down arrow key (- /) to move to the next
option.
General Settings
Hardware Version
Vx.xx
Read-only
This window shows the Hardware Version of the relay.
Press the Right arrow key () to move to the next option.
General Settings
Equipment
Transformer
Read-only
This window shows the Equipment of the relay.
Press the Right arrow key () to move to the next option.
General Setting
Virtual Scheme 1
Disabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Virtual Scheme 1 can be set i.e.
Disabled / Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
General Setting
Virtual Scheme 2
Disabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Virtual Scheme 2 can be set i.e.
Disabled / Enabled.
Press the Minus / Down arrow key (- /) to move to the next