Ashida ADR233B - Page 325

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 325 of 479
ADR233B
Note: When set as Disabled
Press the Minus / Down arrow key (- /) to move to the next
option.
W1 Phase OC
IP>2 Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the IP>2 Enable can be set i.e.
Disabled/Enabled.
Note: When set as Disabled
Press the Minus / Down arrow key (- /) to move to the next
option.
W1 Phase OC
IP>3 Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the IP>3 Enable can be set i.e.
Disabled/Enabled.
Note: When set as Disabled
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.
PROTECTION
CLEAR RECORDS
OUTPUT & LED TEST
GROUP 1

Note : The Phase OC settings of W2 Phase OC is similar to W1 Phase OC