Ashida ADR233B - Page 357

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 357 of 479
ADR233B
Press the Right arrow key () to move to the next option.
W1 Sequence OC
Seq.I>1 Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Seq.I>1 Enable can be set i.e. Disabled /
-Seq / +Seq.
Note: When set as Disabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
W1 Sequence OC
Seq.I>2 Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Seq.I>2 Enable can be set i.e. Disabled
/ -Seq / +Seq.
Note: When set as Disabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
W1 Sequence OC
Seq.I>3 Enable
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Seq.I>3 Enable can be set i.e. Disabled
/ -Seq / +Seq.
Note: When set as Disabled.
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.