Rev No. : 05
Page No. : 389 of 479
6
3
EDIT
EDIT
This is default window showing the Main Menu.
Step 1 : By using Plus / Up arrow Key (+ /5) or Minus / Down arrow key (- /6) scroll
the Main Menu / Group and select GLOBAL setting.
Step 2 : Press the right arrow key (4) the relay will display the next option.
Step 3 : By using Plus / Up arrow Key (+ /5) or Minus / Down arrow key (- /6) scroll
the Main Menu / Group and select General setting.
Step 4 : Press the right arrow key (4) the relay will display the next option.
OR
Step 12: Press the TARGET RESET key to CANCEL the Changes. (i.e.
DISCARD Settings)
This window will flash for a moment and the control will return to the main
menu.
MEASURMENT
GLOBAL
4
CB CONTOL
REPORTING
General Settings
4
Setting Group
PORT F
PORT 1
General Settings
PassWord
****
PassWord = 0001
This window will be display and the extreme right alpha / numerical number will
start blinking.
Note: The selected alpha / numerical number can be shifted right to left and left to
right by using the left arrow key (3) and Right Arrow key (4).
Step 6: Enter the perversely set Password by using the Plus / Up arrow key (+ /5)
or the Minus / Down arrow key (- /6).
Step 7: After editing the Password, press the EDIT Key.
PassWord = 0000
SAVE Settings
This window will be display. If correct Password is entered.
Step 8: Enter the New Password by using the Plus / Up arrow key (+ /5) or the
Minus / Down arrow key (- /6) option.
[All Editable settings are password protected so when the EDIT key is pressed it will
display the password and the settable Alpha / Numerical value will start blinking].
The Password is four (4) digits alpha numeric. i.e. 0000 – zzzz/ZZZZ
Step 9: After editing the Password, press the EDIT Key. The settable Alpha /
Numerical value will stop blinking.
Step 10: Press the Right arrow key (4) to move to the next option
6
General Settings
Password
0000
6
PassWord = 0000
PassWord OK
This window will be displayed
Step 5 : Press the EDIT Key to activate the settings
EDIT
PassWord = 0000
Wrong PassWord
This window will be display.
If In-correct Password is entered
General Settings
PassWord
****
DISCARD Settings
Step 11: Press the Left arrow key (3) to SAVE the changes
This window will flash for a moment and the control will return to the main
menu.
Press 3 Key
For Save
Press Target Reset
Key For Cancel
Target Reset
To Next Page
Loading...
