Ashida ADR233B - Page 39

ADR233B
Doc ID : ADR233B/IM/01
Ref ID : ADR233B/IM/I&S
Rev No. : 05
Page No. : 39 of 479
X.
Power Supply Immunity Test IEC60255-11 & IEC61000-4-11
XI.
Conducted & Radiated frequency Emission
Test
IEC60255-25, IEC60255-26 (ed3)
Insulation Tests:
I.
High Voltage Test IEC60255-27
II.
Impulse Voltage Test IEC60255-27
III.
Insulation Resistance IEC60255-27
Environmental tests:
I.
Cold test : IEC-60068-2-1
II.
Dry heat test : IEC-60068-2-2
III.
Damp heat test, steady state : IEC-60068-2-78
IV.
Change of Temperature : IEC-60068-2-14
V.
Damp heat test, cyclic : IEC-60068-2-30
VI.
Enclosure Protection Test (IP54) : IEC-60529
CE compliance
I.
Immunity : IEC-60255-26
II. Emissive Test : IEC- 60255-26
III.
Low voltage directive : EN-50178
Mechanical tests
I. Vibration Endurance Test : IEC 60255-21-1
II.
Vibration Response Test : IEC 60255-21-1
III.
Bump Test : IEC 60255-21-2
IV.
Shock Withstand Test : IEC 60255-21-2
V.
Shock Response Test : IEC 60255-21-2
VI.
Seismic Test : IEC 60255-21-3
NOTE: Detailed Type Test Reports are available on request