Maintenance-Object Repair Procedures
555-233-143
8-378 Issue 1 May 2002
2000 FAIL No response is received from the endpoint or the adjunct. For BRI endpoints:
1. Consult the endpoint’s documentation to determine whether ISDN-BRI
Management and Maintenance Procedures are supported. If not
supported, use the change station extension command to change the
“MIMs Supported?” field to “no.” Use the busyout station extension and
release station extension commands to busyout and release the
endpoint to resolve any endpoint alarms resulting from failure of this test.
2. If the endpoint supports these procedures and the test continues to fail,
assume the endpoint is defective and replace it.
PASS The endpoint has successfully responded to the switch’s application message.
Table 8-158. Test #629 BRI Layer 3 Query — Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page
To Next Page
Loading...
