Avaya S8700 - Page 1110

Maintenance-Object Repair Procedures
555-233-143
8-388 Issue 1 May 2002
Cabinet Temperature Query Test (#122)
This test queries an EPN’s Maintenance circuit pack for the status of the
temperature and fan sensors in the cabinet.
Table 8-162. Test #122 Cabinet Temperature Query Test
Error
Code
Te s t
Result Description / Recommendation
1000 ABORT System resources required to run test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort with error code 2000, check for power
problems with the EPN’s A carrier. Look for and resolve every
AC-POWER and CARR-POW alarm in a multicarrier cabinet or
DC-POWER alarm in a single-carrier cabinet. Repeat the test.
3. If the test continues to abort with error code 2000, check for and resolve
every MAINT error in an EPN. Repeat the test.
2029,
2319,
2500
ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
Continued on next page